Dometic RV Awning Parts

Dometic RV Awning Parts

Looking for Dometic RV awning parts, which used to be A&E awning parts? All those parts such as the replacement roller, adjustment arm, mounting brackets, rafter assembly, retraction springs, torsion assembly and even the awning fabric itself can be hard to find and replace. If you go to the Dometic Awning website, you can tell right away that they are not in the replacement part business because there are no "Parts" links to be found. They do not even directly sell their RV awnings from their website - you have to go to another site to make your purchase. If you are having trouble finding parts, you may first want to try contacting Dometic at their customer support listings via email: customersupportcenter@dometicusa.com or by phone: 1-800-544-4881.

If Dometic cannot supply your needed part nor direct you to an alternative source, then you may have to do some searching on your own and perhaps try some OEM parts from RV awning part dealers that can be found online, locally or even on eBay. We have listed what is currently available on eBay right now through sellers below.

All Dometic RV Awning Parts (formerly A&E Awning)

Current Dometic awning parts listings:

RV 10 10 WIDE X 89 TALL DOMETIC AWNING WHITE BLACK GREY TAN
RV 10 10 WIDE X 89 TALL DOMETIC AWNING WHITE BLACK GREY TAN
$9.99

Dometic RV Camper Trailer Pop up 8ft AE Trim Line Bamboo Case Bag Awning Canopy
Dometic RV Camper Trailer Pop up 8ft AE Trim Line Bamboo Case Bag Awning Canopy
$149.95

RV 15 1 WIDE X 89 TALL DOMETIC AWNING WHITE BLACK GREY TAN
RV 15 1 WIDE X 89 TALL DOMETIC AWNING WHITE BLACK GREY TAN
$36.99

RV 17 WIDE X 88 TALL DOMETIC AWNING BLACK GREY TAN
RV 17 WIDE X 88 TALL DOMETIC AWNING BLACK GREY TAN
$46.50

Dometic RV Camper Pop up 9 ft AE Trim Line Case Bag Awning Canopy
Dometic RV Camper Pop up 9 ft AE Trim Line Case Bag Awning Canopy
$175.00

RV 16 1 WIDE X 89 TALL DOMETIC AWNING BLACK GREY TAN
RV 16 1 WIDE X 89 TALL DOMETIC AWNING BLACK GREY TAN
$60.00

RV 14 1 WIDE X 89 TALL DOMETIC AWNING BLACK GREY TAN
RV 14 1 WIDE X 89 TALL DOMETIC AWNING BLACK GREY TAN
$49.00

DOMETIC AE 8000 Replacement Awning Slider Assembly with Rivet 830463P 1 PK
DOMETIC AE 8000 Replacement Awning Slider Assembly with Rivet 830463P 1 PK
$9.95

12 VOLT DOMETIC ELECTRIC AWNING ARMS MODEL 8952002400U BLACK
12 VOLT DOMETIC ELECTRIC AWNING ARMS MODEL 8952002400U BLACK
$80.00

RV 12 11 WIDE X 89 TALL DOMETIC AWNING BLACK GREY TAN
RV 12 11 WIDE X 89 TALL DOMETIC AWNING BLACK GREY TAN
$11.99

Current Dometic Awnings and Accessories:
8500 Patio Awning, 8500 Plus Patio Awning, 9000 Patio Awning, 9000 Plus Patio Awning, 9100 Power Awning, Catalina Case Awning, Deluxe Plus Window Awning, Elite Window Awning, Horizon II Case Awning, LA03 Power Awning, Oasis Door Awning, Patty O'Room, Power Window Awning, SlideTopper Deluxe, SlideTopper Elite, SlideTopper Full Cover, Sunchaser II, Sunchaser Patio Awning, Trim Line Case Awning, Trim Line Screen Room, Two Step Patio Awning, WeatherPro Power Awning and Xtend A Room.

If you do not find your Dometic RV awning parts either directly from Dometic or eBay, then list your part below - as thoroughly as possible, i.e., description and part number - and we will try to find a replacement for you.

Filed Under RV Awning, RV Awning Parts, RV Awning Repair, RV Awning Replacement | 54 Comments

Tagged With , , , , , , , , , , , ,

Comments

54 Responses to “Dometic RV Awning Parts”

  1. Ray Murray said:

    I need an handle for my Dometic Awning. The one you guide the awning up and down with.

  2. Jackie Jones said:

    I’m looking for parts such as knobs & rail &
    arm & mounting brackets for A & E (Dometic) awning
    model # 834AW18.401

    Can you help me?

  3. George Labarca said:

    I need a replacement canvas for my dometic (A&E) RV awning model 848DX21.400. Can you help?

  4. Greg Knight said:

    I have a Dometic Sunchaser manual awning model 834EV19.400 and there is a grey clip at the end or the arm that holds the tensioning rod at the end . The gray clip came off and missing the spring that works with the clip. Any idea what to do?

  5. Patrick Murphy said:

    I need a replacement patio foot for my Dometic awning.

  6. Russ Vogl said:

    Hi, I;m looking for the hinge material that connects the top slat to awning rail. It’s an A&E 9000. My install book shows a metal hinge[no part #] but what broke seems to be a plastic material. Any idea where I can get some replacement.

  7. john said:

    I have an a&e awning on the support arm that slides on the main arm. There is a plastic piece that slide in the track of the main arm. Do you have this plastic piece? Or do I have to purchase the arm?

  8. Lloyd said:

    I need a 7′ x 17′ 2”fabric replacement for a Hi-Lo trailer.
    Dometic support gave me the part #B3109003EA.418
    The roller tube # is 841ET18.400

  9. Darrel said:

    I am looking for a Rafter Claw, for a Dometic, (A&E) Sunchaser ll patio awning.
    A&E 8500 Series
    Part No. 801GF16.400B
    03498131
    MFG No. 958332290
    9108568772
    The Number on one of the arms is:
    MFG No. 8485000.402B
    Prod. No. 958465205, Ser. No. 02996524, the claw on both arms appear to be the same.

  10. Mike said:

    I am looking for the little aluminum? lever that used to be on the end of my awning. I must have side-swiped a tree as there were bark chips where the lever once was. It is a Dometic awning and the number on one of the arms is 8483003.401. Do you have this piece? Or do I have to purchase the whole end piece? Or another awning or perhaps replace my RV?

  11. jim said:

    I need a replacement roller tube for my camper awning where can I find one? It is 20′ long.

  12. Lisa said:

    I need an inner leg for a Horizon awning. The foot came off and now the dealership says I need to replace the entire awning. Heck, I’ll even spring for a new leg, but it is only about 6-7 years old and barely used. Crazy!

  13. david said:

    My rv awning over my entrance door on the m/h is a manual operation. I have a rod to unwind awning, I am looking for the plastic component that is attached to awning to crank open, it is made of cheap plastic, broke real soon after purchasing m/h, hope someone can help.

  14. sean said:

    one of the legs to my awning was ripped off the side of my motorhome, the damage is a new latch that mounts to the RV(which I found)and I need the arm that slides inside the main arm which I can’t find, can you help. It is a a&e 9000 awning on a 1999 national RV thanks

  15. Kim said:

    Looking for a replacement roller tube for a Sunchaser AE Awning Product #958477346. 20′. Also need 4 of the awning rail feet where they attach to the RV. These are what the awning feet attach into. 2 for the RV and 2 for the deck.

  16. Hazel said:

    I’m looking for the slide arm latch.The one that locks the arm in place.Series 848200–838200D

  17. Don said:

    I need a cylinder for my motorhome Electric Patio Awning It measures 234 inches long. I have a 2005 Winnebago Journey

  18. Thomas said:

    I need a roller tube for dometic awning product # 958497862 model #848GF21.400 serial #93297414 20″6′ long.

  19. Kenneth said:

    I am looking for a Dometic awning inner rafter pt # 3309974005. All i need is the small end part with the wings on it, they break off real easy.

  20. Lee said:

    I have a 1999 Airstream Bambi with an Elite 9000 awning. It has curved Square 1 hardware. Dometic no longer carries parts for this. I need rafter assembly arms, inner, secondary, LH & RH. I believe the part #’s are 3107854.014 & 3107854.006

  21. Edwin said:

    I need a tube for my awning model # 802FT16.401B can you help

  22. Eugene said:

    I hit a tree limb with my bedroom rollout awning,it bent the small retangular arm that goes into the tension portion of the assembly and it ripped the awning fabric.I removed the whole awning and want to replace the fabric and the small arm mechanism.Is it to much for a person to do or should I go to a repair facility like camping world? The Product #958366034, Model #85097cQ.078, Serial #72481425.Thanks for your assistance. Eugene

  23. Bob said:

    I need a replacement roller for my 20+ ft Dometic 815/Weatherpro power patio awning. It was broken by a tree limb falling while it was in the open position. Thanks for you help. Bob

  24. warren said:

    Looking for a chrome handle lift part no.3311575000m & a catch slider part no. 48-1443 (aluminum).

  25. chris said:

    Where can I find a roller tube for a 8500 Dometic? Its 21 foot long, thanks any help will be appreciated.

  26. Ray said:

    I have a 2002 Sunseeker made by Forrest River with a awning by A&E Systems. I hit a post and broke the flange on the end of the awning sliding pole that attaches to the flange on the side of the RV. I do not know part number or anything else about the awning other than it has a A&E sticker on the pole . The RV is 31 ft. Can you supply the broken flange or do I need to buy the end of the side pole. If so, can you provide. Please let me know as I need to leave on a trip in the next few weeks.

  27. Burton said:

    Hello I just purchased an A&E deluxe plus window awning part # 86073. The awning was manufactured in 2010. The manual shows there should be a metal hinge & rubber seal included with this awning. But there was none included when I opened the package. My question is was there a design change or is the metal hinge & rubber seal missing. If I need one where can I purchase these items?

  28. Sandy said:

    I am looking for the replacement fabric for a Domestic 8500 awning. This would be the very small piece of fabric that connects the awning from the trailer to the weathershield (goes into the track from the trailer to the weathershield). We got our awning second hand and the original owner sliced that piece of fabric off to remove the awning.

  29. Brooke said:

    I need the inner awning arm for an A&E/Dometic/Sunchaser (not sure it seems like they are all listed as the manufacturer)… these are the part numbers listed on the arm:
    958301576, prod 834av16.401, 958302681, 8271000.401b. Like I said we only need the inner arm, not the entire mechanism.
    Thanks!!

  30. Odas said:

    I need the Instructions for sunchaser 8500

  31. RVAwning said:

    Here is a link to the Sunchaser 8500 and 9000 Awning User’s Guide (pdf file):

  32. TOM said:

    NEED A & E 8500, RV, AWNING ARM, OLD STYLE, (2001)

  33. Hank said:

    I’m looking for a replacement arm assembly for a Dometic awning Model # 821DP00.2341S.
    The arm assemble is model # 8485000

  34. Chris said:

    I am looking for the assembly that tightens the main arms to the extended position. It is a cast aluminum piece in the shape of a square U with threads in it for the tightening knob. One part of the arm slides inside the other. This tightens them together. Sunchaser Model #834AV17.400

  35. Donnie said:

    I have a A&E Awning MFG#848GF14.400B,PNC#958537630
    I replace the canvas about six months ago and now I’m buying an electric patio awning.I would like to sell it as a set. it’s the hold assembly and I paid $800 and will take the best offer. 205-243-2808

  36. Bob said:

    The rain filled up my awning and now the roller tube is bent in the middle, is that part available? Dometic Sunchaser product number 958363141, Model Number 834AV18.401, Serial Number 70886129.

  37. sharleen said:

    We need the small support ‘brick’ that goes in the sliding arm to keep it straight. It feels like lava rock. Model Domestic 8500-9000.

  38. Patrick said:

    There is a grey clip at the end or the arm that holds the tension rod at the end . The gray clip came off and missing the spring that works with the clip. Any idea what to do?

  39. Joe said:

    I need to replace the strap that is used to pull awning in and out. Where can I order a replacement in South Florida?

  40. Burdette said:

    I am in need of an 12 volt awning motor, Dometic Part # 3307923.015S Availability and price requested

  41. ken said:

    I need an awning rail for dometic catalina 2500 9588300910. I don’t know the part #.

  42. marie said:

    Im looking for the slide in part that connects the an awning to camper ..this is so we can put a room on the outside like a patio but so it does on perm attach to camper is there a metal piece that slides in the bracket attached to the camper

  43. Ray said:

    I need a slider catch and a locking lever for my Sunchaser 8500/9000. Can you tell me were I can find them?

  44. Steve said:

    Need a replacement handle that releases the locking pin to raise and lower the awning arms. I have a A&E 2001 model.

  45. stephen said:

    I need a pitch arm for a dometic power awning: 8951001.400 basement hardware, 891002.400 standard hardware, replacement pitch arm models 895xoxx

  46. David said:

    I need the lug (looks like a double claw) that fits into the secondary rafter at the roller end. My awning is a Dometic 8500. The specific part # for this end piece is 3312510. I would buy the two rafters if this CLAW is not available separately.

  47. Wally Hinds said:

    I am looking for a Rafter Claw, for a Dometic, (A&E) Sunchaser ll patio awning.
    A&E 9000 Series, Part No. 801GF16.400B, 03498131, MFG No. 958332290, 9108568772. The Number on one of the arms is: MFG No. 8485000.402B, Prod. No. 958465205, Ser. No. 02996524, the claw on both arms appear to be the same.

  48. Chet said:

    I have a Dometic power awning on a 2013 Vista 26E.
    An aluminum bar(?) attached to a cylinder and main awning bar and top of the roof channel has bent at the cylinder. It appears to be about 3-4 feet long. Can i get that part only? The top of the cylinder attaches to the middle of the bar and that is where it bent, stopping the awning from fully closing.
    Thank you

  49. billy said:

    I am looking for a set of dometic a&e 8500 torsion springs right and left side. Right side locks left does not.

  50. KIRK said:

    Looking for Model #834FK21401 Dometic Awning

  51. Art said:

    Looking for lateral arms LH and RH for A&E awning model LA-03 (810)

  52. bobby said:

    I have a 2003 A&E System by Dometic with a model num 834av18.401 I need 2 replacement lift handles that raise and lower awning plus the gray clips that your slide arm locks into.

  53. Dick Johnson said:

    model 970cq56.008
    I need end caps for this model over the door awning.
    The awning material is about 4 ft square. The end caps are plastic.
    other numbers on the awning are:
    FP 702004 A00
    F46/F50 66 PRO/F60 T 1P
    SN 176010
    216498285

  54. john Murphy said:

    A&E Catalina 2600 awning. i need the end caps Left and Right. Part numbers are 3313115.002 and 3313115.010. Thanks

Leave a Reply